This is a text-only version of the following page on https://raymii.org: --- Title : Installing OpenVMS 8.4 Alpha inside AXPbox on Debian 10 / Ubuntu 20.04 with networking Author : Remy van Elst Date : 04-11-2020 Last update : 08-11-2020 URL : https://raymii.org/s/tutorials/Installing_OpenVMS_8.4_Alpha_in_AXPbox_with_networking.html Format : Markdown/HTML --- ![openvms logo][25] In my [previous article][1] I announced the fork of the `es40` emulator to `AXPbox` by [Tomáš][2] including bug fixes and rework allowing it to install OpenVMS 8.4 without problems. Since then I've contributed a few patches and doc updates, now NetBSD boots as well (the patches for netbsd were from other es40 forks). I've also looked into getting networking setup, since that is a bit of a tedious process due to pcap and linux, pcap being used for network emulation. SIMH (among others, [a great VAX emulator][3]) suffers from the same problems with networking. This guide will show you how to install AXPbox and get OpenVMS 8.4 ready and running with networking inside AXPbox. It's a rather long guide with a lot of information and output. In this guide I'll cover: - Getting OpenVMS 8.4 from VSI - Compilation and setup of AXPbox - Configuring AXPbox, - Installing OpenVMS inside AXPbox - OpenVMS Configuration - Adding a user to OpenVMS - Setting up networking in OpenVMS - Port forwarding to the virtual machine - Setup SSH, FTP and telnet - Downloading and installing curl I do recommend you to read the [AXPbox wiki Installation Guide][4], in the future that might be more up to date on installing OpenVMS. > [You can read all my OpenVMS articles here](/s/tags/openvms.html)

Recently I removed all Google Ads from this site due to their invasive tracking, as well as Google Analytics. Please, if you found this content useful, consider a small donation using any of the options below:

I'm developing an open source monitoring app called Leaf Node Monitoring, for windows, linux & android. Go check it out!

Consider sponsoring me on Github. It means the world to me if you show your appreciation and you'll help pay the server costs.

You can also sponsor me by getting a Digital Ocean VPS. With this referral link you'll get $200 credit for 60 days. Spend $25 after your credit expires and I'll get $25!

This guide is a big and comprehensive one, we cover a lot of ground. Use the table of contents above to skip to a part you're interested in. The order of topics is specifically so you can follow along. And if you're able, do [contribute back to AXPbox][2], it's our only hope for an open source Alpha emulator. ### Preface on networking and using a virtual machine I'll start off with a bit about networking. It took me a long time and [help from Tomas][5] to figure out what was happening and why. A short summary is that AXPbox uses `libpcap` to emulate networking. On Linux, packets made by axpbox, are not received by the host system. That means, that if you run AXPbox on your desktop, your desktop will not be able to communicate with AXPbox, but other systems on the network will be. This issue can be resolved by using 2 network interfaces on your host system (one for axpbox and one for regular networking) or by a virtualbox setup which we'll explain further. This [issue][7] is documented by SIMH, they have the same setup for networking (although, simh also support tun/tap and vde, which do not suffer from this problem). In the [simh docs][8]: > On Windows using the WinPcap interface, the simulated computer can "talk" to the host computer on the same interface. On other platforms with libpcap (linux, mac OS), the simulated computer can not "talk" to the host computer via the selected interface, since simulator transmitted packets are not received by the hosts network stack. The workaround for this is to use a second NIC in the host and connect them both into the same network; then the host and the simulator can communicate over the physical LAN. And in the [SIMH FAQ PDF][6]: > 2.11 - My Linux, OSX or other Unix host can't communicate with the PDP-11 or VAX over Ethernet; why? > The network stacks on these systems don't naturally receive packets which are transmitted with the pcap_sendpacket API... I also had issues with bridged network adapters. I'm used to creating a bridge for when using KVM virtual machines, and giving each VM it's own `tapX` interface, they can access the network directly that way. Because of the above, if you want to use networking (which you probably will, it's awesome to play with clustering) and have only 1 NIC in your PC, I recommend you use a virtual machine with two separate network adapters. In this guide I'm using Ubuntu 20.04 on my desktop, which runs Virtualbox (I choose that over KVM for ease of use in this guide). Virtualbox has a Debian 10 virtual machine with 2 virtual network adapters, the first is in the virtualbox `NAT` network, that one will be used by OpenVMS, the second is bridged into my own LAN, that one is used to SSH into the Debian VM from Ubuntu. This Debian 10 virtual machine runs AXPbox, so it's a bit of virtual machine inception going on. Have your spinning top ready. OpenVMS inside AXPbox can connect to the internet, and via virtualbox you can create port forwards back into OpenVMS. That will be explained later on in the network section, including screenshots. I had issues with 2 bridges interfaces, OpenVMS couldn't connect to my router and my host PC couldn't connect to OpenVMS, but Tomas has had that setup working with KVM, so that might work, but for the sake of a reproducible tutorial, I'll be focusing on this Virtualbox `NAT` setup. When I plugged in a USB NIC adapter and configured AXPbox to use that, connectivity worked as expected. If you have multiple separate network cards in your PC, you don't need the VM setup. **Summarizing, install Virtualbox, install a Debian 10 VM with 2 NIC's, one **NAT and one Bridged, or use multiple NIC's in your PC.**. If you're comfortable with KVM you can do that as well, the network setup should be easy enough with the theory and explanation above. ### Getting OpenVMS 8.4-2 from VSI (Hobbyist program) Currently there is only one legal option to get OpenVMS installation media, the [VSI Community License program][9]. Fill out the form there and you'll get an e-mail with login credentials to the VSI SFTP server. Login in to the SFTP server and download the file named `ALPHA0842L1.ZIPEXE`. This is a self-extracting archive for OpenVMS Alpha, but it can be extracted normally using `unzip` or an archive manager on any operating system. After unzipping you should have the file `ALPHA0842L1.ISO`. $ unzip ALPHA0842L1.ZIPEXE Archive: ALPHA0842L1.ZIPEXE warning [ALPHA0842L1.ZIPEXE]: 120320 extra bytes at beginning or within zipfile (attempting to process anyway) inflating: ALPHA0842L1.ISO $ md5sum ALPHA0842L1.ISO e19f1123bdb565d9f9bb736be5314c46 ALPHA0842L1.ISO $ md5sum ALPHA0842L1.ZIPEXE 2228fc25d9640a16a57bada6d8c609ec ALPHA0842L1.ZIPEXE You will also receive an email containing your license, PAK files. Save that as well. #### HP Enterprise OpenVMS 8.4 and a bit of time travel Alternatively you can use `ALPHA084.ISO` from the now concluded HPE OpenVMS Hobbyist Program. You do need a different license PAK though, from HPE, and you need to set the date inside the Debian virtual machine to back when your [HPE hobbyist license][10] was still valid. For hobbyist use, it will work fine inside AXPbox. [Here is a site hosting that HP ISO][11] and [here is another one][12], but I'm not sure how long those will stay alive. Google the filename or resort to less legal internet protocols to get a copy of this ISO. $ md5sum ALPHA084.ISO 55248b10ca08a350731daa12cc253b8c ALPHA084.ISO Reset the time inside the Debian VM: systemctl stop systemd-timesyncd; systemctl disable systemd-timesyncd; date --set 2018-10-18; hwclock --set --date 2018-10-18 Reset the time inside OpenVMS: SET TIME=18-OCT-2018:13:00:00 Now that you've got the ISO and license, continue on building and installing the emulator. ### Compiling AXPbox I'll assume you do these steps inside the Debian 10 virtual machine you've setup. They work the same for Ubuntu 20.04. First install required dependencies to compile AXPbox: apt install libpcap-dev build-essential unzip libx11-dev libsdl-dev cmake libpoco-dev libxt-dev git Clone the repository: # I'm building commit d7e7c93 git clone https://github.com/lenticularis39/axpbox Create a build folder and navigate into it: cd axpbox mkdir build cd build Run `cmake` to generate the files for `make`: cmake .. -DCMAKE_BUILD_TYPE="Release" Run `make` to start the actual compile make -j$(($(nproc) + 1)) Output, make sure that `pcap found` appears if you want networking -- pcap found. Networking support enabled -- sdl found. SDL graphics support enabled -- x11 found. x11 graphics support enabled -- C++ compiler flags : -O3 -march=native -DNDEBUG -- C compiler flags : -O3 -- Linker flags : -- Configuring done -- Generating done -- Build files have been written to: /root/git/axpbox/build Scanning dependencies of target axpbox [ 1%] Building CXX object CMakeFiles/axpbox.dir/src/AliM1543C.cpp.o [ 3%] Building CXX object CMakeFiles/axpbox.dir/src/AliM1543C_ide.cpp.o [ 4%] Building CXX object CMakeFiles/axpbox.dir/src/AliM1543C_usb.cpp.o [...] [ 95%] Building CXX object CMakeFiles/axpbox.dir/src/gui/scancodes.cpp.o [ 96%] Building CXX object CMakeFiles/axpbox.dir/src/gui/sdl.cpp.o [ 98%] Building CXX object CMakeFiles/axpbox.dir/src/lockstep.cpp.o [100%] Linking CXX executable axpbox [100%] Built target axpbox You now have the emulator built and ready for configuration: ./axpbox Output: AXPBox Alpha Emulator (version 0.1) Usage: ./axpbox run|configure #### Prepare the license ISO If you have your PAK from VSI (product activation key) with the hobbyist license, it's handy to build an ISO and later on after the installation, mount that and run the `ALPHA_COMMUNITY_LICENSE_PAK_XX_XXXX.COM` script on OpenVMS, than it is to copy and paste. Not all terminal emulators handle it well (too fast) and with the HP license, it's way to long to copy and paste. The VSI license seems shorter. First copy the OpenVMS license script (`.COM`) to the Debian VM. Then create the ISO: # create a folder for the script mkdir license # copy the license script into that folder cp ALPHA_COMMUNITY_LICENSE_PAK_SEP_2020.COM license # generate an ISO of that folder genisoimage -V license -o pak.iso license Output: Total translation table size: 0 Total rockridge attributes bytes: 0 Total directory bytes: 0 Path table size(bytes): 10 Max brk space used 0 175 extents written (0 MB) Later on when we're finished installing OpenVMS we'll activate this license from the ISO. [Read more on OpenVMS scripts, ISO and record format here][13] #### Download the SRM ROM Summarized, the SRM rom is sort of a BIOS, but for Alpha and OpenVMS requires this to boot. It was available from HP, but not anymore, so I mirrored it. Create a rom folder and download the file there: mkdir rom && cd rom wget https://raymii.org/s/inc/downloads/es40-srmon/cl67srmrom.exe cd .. Quoting [Grootersnet][14] with more information on SRM and PALcode: > 14.3.2 What does SRM mean? What is PALcode? > The abbreviation SRM is derived from the Alpha System Reference Manual, the specification of the Alpha architecture and the associated firmware. > PALcode is a name assigned to a particular set of functions provided by the SRM firmware. PALcode is used to provide low-level functions required by higher-level operating system or application software, functions which may not be directly available in Alpha hardware. PALcode is implemented using available Alpha instructions and using the Alpha processor, though PALcode operates in a mode which simplifies programming. PALcode is also permitted access to processor-specific and otherwise internal features of a particular Alpha microprocessor implementation; microprocessor-specific features which are not easily accessible to operating system or application code. We're almost ready to install OpenVMS. After compiling and preparing, all that is left is configuring AXPbox. #### Configuring AXPbox - es40.cfg AXPbox has an interactive configuration prompt which you can invoke with `./axpbox configure`. It will ask you a set of questions, and you can read more about it [on the project wiki][4]. For the purpose of this guide, please use the below configuration. Place the below contents in a file named `es40.cfg` in the same folder as the binary. sys0 = tsunami { memory.bits = 28; rom.srm = "rom/cl67srmrom.exe"; rom.decompressed = "rom/decompressed.rom"; rom.flash = "rom/flash.rom"; rom.dpr = "rom/dpr.rom"; cpu0 = ev68cb { speed = 800M; icache = true; skip_memtest_hack = true; } serial0 = serial { port = 21264; action = ""; } pci0.15 = ali_ide { disk0.0 = file { file = "disk0.img"; serial_number = "VMS"; rev_number = "8.4"; model_number = "OpenVMS8.3"; read_only = false; cdrom = false; autocreate_size = 6000M; } disk1.0 = file { file = "ALPHA0842L1.ISO"; read_only = true; cdrom = true; } } pci1.1 = dec21143 { adapter = "enp0s3"; mac = "08-00-DE-AD-BE-EF"; } pci0.7 = ali { mouse.enabled = false; vga_console = false; } pci0.19 = ali_usb { } } Change the `adapter = "enp0s3"` line to match your virtualbox NAT adapter. That is, not the NIC with the IP of the Debian VM you're connecting to, but the one with the internal Virtualbox network. In my case `enp0s8` is the bridged adapter and `enp0s3` is the NAT adapter. Make sure the `ALPHA0842L1.ISO` installation ISO is in the same folder as the binary and this config file. If you forget to place that file, you'll get a crash: pci0.15(ali_ide).disk1.0(file): Could not open file ALPHA0842L1.ISO! Emulator Failure: Runtime exception: pci0.15(ali_ide).disk1.0(file): File does not exist and no autocreate_size set: /root/git/axpbox/src/DiskFile.cpp, line 124 Segmentation fault I have my setup with 1800MHz `cpu.speed` and 30 `memory.bits` (1 GB instead of 256MB). For this guide I'll recommend the defaults (800MHz and 256MB). If you want to skip the memory test at startup (saves a few minutes of booting), add the following underneath the `icache` line in the `cpu` block: skip_memtest_hack = true; Do note that this will make the installation of OpenVMS fail, so add the line after you're done installing. Update 08-11-2020: Tomáš did [a bugfix][27], `skip_memtest_hack` now works during installation. The disk will be automatically created at first start of the emulator: pci0.15(ali_ide).disk0.0(file): Could not open file disk0.img! pci0.15(ali_ide).disk0.0(file): writing 6000 1kB blocks: 100% pci0.15(ali_ide).disk0.0(file): 6000 MB file disk0.img created. pci0.15(ali_ide).disk0.0(file): Mounted file disk0.img, 12288000 512-byte blocks, 15360/16/50. You can also manually create it, but that shouldn't be needed: truncate -s 6G disk0.img If everything is setup correctly, the emulator should prompt you to connect to a telnet port: serial0(serial): Waiting for connection on port 21264. Continue on to the OpenVMS installation part. ### OpenVMS Installation Connect to the telnet port as specified by the emulator prompt (replace `10.0.0.8` by the IP of your Debian VM). $ telnet 10.0.0.8 21264 Trying 10.0.0.8... Connected to 10.0.0.8. Escape character is '^]'. This is serial port #0 on ES40 Emulator OpenVMS PALcode V1.98-104, Tru64 UNIX PALcode V1.92-105 starting console on CPU 0 [...] 256 MB of System Memory Testing the System Testing the Network AlphaServer ES40 Console V7.3-1, built on Feb 27 2007 at 12:57:47 P00>>> If you see the `P00>>>` prompt, continue on. If you get a crash, disconnect or segfault, check the emulator tab, it has an error what is wrong. Find out which device has the installation ISO: P00>>>show dev Output: dqa0.0.0.15.0 DQA0 OpenVMS8 .3 dqb0.0.1.15.0 DQB0 ALPHA084 2L1.ISO dva0.0.0.1000.0 DVA0 ewa0.0.0.1.1 EWA0 08-00-DE-AD-BE-EF In our case, `DQB0` has the install disk and `DQA0` is our root disk. Boot the install ISO: P00>>>boot DQB0 Output: (boot dqb0.0.1.15.0 -flags 0) block 0 of dqb0.0.1.15.0 is a valid boot block reading 1230 blocks from dqb0.0.1.15.0 bootstrap code read in base = 200000, image_start = 0, image_bytes = 99c00(629760) initializing HWRPB at 2000 initializing page table at ff56000 initializing machine state setting affinity to the primary CPU jumping to bootstrap code OpenVMS (TM) Alpha Operating System, Version V8.4-2L1 Copyright 2016 VMS Software, Inc. There will be some more output: Installing required known files... Configuring devices... %EWA0, Auto-negotiation mode set by console %EWA0, Link state: UP %EWA0, Auto-negotiation (internal) starting %EWA0, Full Duplex 100baseTX connection selected When that's done, takes a while, the installer menu pops up: **************************************************************** You can install or upgrade the OpenVMS ALPHA operating system or you can install or upgrade layered products that are included on the OpenVMS ALPHA distribution media (CD/DVD). You can also execute DCL commands and procedures to perform "standalone" tasks, such as backing up the system disk. Please choose one of the following: 1) Upgrade, install or reconfigure OpenVMS ALPHA Version V8.4-2L1 2) Display layered products that this procedure can install 3) Install or upgrade layered products 4) Show installed products 5) Reconfigure installed products 6) Remove installed products 7) Find, Install or Undo patches; Show or Delete Recovery Data 8) Execute DCL commands and procedures 9) Shut down this system Enter CHOICE or ? for help: (1/2/3/4/5/6/7/8/9/?) Enter 1. Some information about patches on the disk pops up: The following PATCH kits are present on the OpenVMS ALPHA distribution media. ----------------------------------- ----------- ---------- PRODUCT KIT TYPE KIT FORMAT ----------------------------------- ----------- ---------- VSI AXPVMS TCPIP_NFS_PAT V5.7-ECO5A Patch Compressed VSI AXPVMS TCPIP_SSH_PAT V5.7-ECO5D Patch Compressed ----------------------------------- ----------- ---------- 2 products found Please consult the OpenVMS ALPHA Installation and Upgrade Manual, the Release Notes, and the Cover Letter to determine if any or all of these patches may be required for your system. Press Return to continue... Press return as said. You will be asked if you want to format the disk: *********************************************************** This procedure will ask a series of questions. () - encloses acceptable answers [] - encloses default answers Type your response and press the key. Type: ? - to repeat an explanation ^ - to change prior input (not always possible) Ctrl/Y - to exit the installation procedure There are two choices for installation/upgrade: Initialize - Removes all software and data files that were previously on the target disk and installs OpenVMS ALPHA. Preserve -- Installs or Upgrades OpenVMS ALPHA on the target disk and retains all other contents of the target disk. * Note: You cannot use preserve to install OpenVMS ALPHA on a disk on which any other operating system is installed. This includes implementations of OpenVMS for other architectures. Do you want to INITIALIZE or to PRESERVE? [PRESERVE] Since this is a new installation, enter `INITIALIZE`. Choose the disk you want to install on: You must enter the device name for the target disk on which OpenVMS ALPHA will be installed. Enter device name for target disk: (? for choices) ? Device Device Error Volume Free Trans Mnt Name Status Count Label Blocks Count Cnt DQB0: Mounted wrtlck 0 ALPHA0842L1 936 81 1 DQB1: Offline 1 DVA0: Offline 0 DQA0: Online 0 DQA1: Offline 1 DAD0: Online 0 Enter device name for target disk: (? for choices) DQA0 In our case that's `DQA0`. If you're going to cluster, every disk must have a unique name. I tend to go with the system hostname as system disk name. In this tutorial, it's fine to just press Return for the default: Enter volume label for target system disk: [ALPHASYS] You will now be prompted which filesystem you want to use: The target system disk can be initialized with On-Disk Structure Level 2 (ODS-2) or Level 5 (ODS-5). (? for more information) Do you want to initialize with ODS-2 or ODS-5? (2/5/?) 5 Enter `5`. (Unless you want to mount this disk image on a VAX.) ODS, meaning on disk structure, is part of the Files-11 filesystem. Compare it with ext2/3/4. - `Files-11` is the general term for five separate file systems, known as on-disk "structure (ODS) levels 1 through 5. - ODS-1 is the flat file system used by the RSX-11 OS, supported by older VMS systems for RSX compatibility, but never used to support VMS itself; it has been largely superseded by ODS-2 and ODS-5. - ODS-2 is the standard VMS file system, and remains the most common file system for system disks (the disk on which the operating system is installed). - Although seldom referred to by their ODS level designations, ODS-3 and ODS-4 are the Files-11 support for the CD-ROM ISO 9660 and High Sierra Format file systems, respectively. - ODS-5 is an extended version of ODS-2 available on Alpha and IA-64 platforms which adds support for case-preserving filenames with non-ASCII characters and improvements to the hierarchical directory support. [Read more on ODS here][15] Hardlinks are fine, so enter `Yes`: Do you want to enable hard links? (Yes/No/?) yes Next is a confirmation question, enter `Yes`: You have chosen to install OpenVMS ALPHA on a new disk. The target system disk, DQA0:, will be initialized with structure level 5 (ODS-5). Hard links WILL be enabled. The disk will be labeled ALPHASYS. Any data currently on the target system disk will be lost. Is this OK? (Yes/No) yes Some more output: Initializing and mounting target.... Creating page and swap files.... Enter a password for the `SYSTEM` user. Make it a good one since this is the same as the `root` account on linux, or `Administrator` on Windows. You must enter a password for the SYSTEM account. The password must be a minimum of 8 characters in length, and may not exceed 31 characters. It will be checked and verified. The system will not accept passwords that can be guessed easily. The password will not be displayed as you enter it. Password for SYSTEM account: Re-enter SYSTEM password for verification: If you're interested, OpenVMS can give users [Secondary Passwords][16]. For now, enter `No` on the clustering questions: Will this system be a member of an OpenVMS Cluster? (Yes/No) No Will this system be an instance in an OpenVMS Galaxy? (Yes/No) No Next are two DECnet networking questions. First some more information on this, background theory. Because we're setting up a cluster in a future article, we must account for that now. For the `SCSNODE` name - the hostname, if you will - you'll have to remember to use only 6 characters or less. The `SCSSYSTEMID` is a bit more complex. It's calculated through the formula `X * 1024 + Y`, where `X` is the `DECnet area number`, and `Y` the `DECnet node number` in that area. Since we're starting from scratch, we can use `X=1`; for the node numbers, it makes sense to think this through properly. Useful tip: use the last octet of the IP address you want to assign to this machine! Since I want to give IPs 10.0.2.131 and 10.0.2.132 to the nodes, I'll give this one `Y=131` and the next one `Y=132`. This leaves us with a `SCSSYSTEMID` of `1155` for this install, and DECnet code `1.131`. The other VM, later on for clustering, will get `1156` as `SCSSYSTEMID` and DECnet code `1.132`. This node will be named `u1` and the second node later on `u2`. Why? Because it's short. For your system to operate properly, you must set two parameters: SCSNODE and SCSSYSTEMID. SCSNODE can be from 1 to 6 letters or numbers. It must contain at least one letter. If you plan to use DECnet, SCSNODE must be the DECnet Phase IV node name, or the DECnet-Plus (Phase V) node synonym. If you have multiple OpenVMS systems, the SCSNODE on each system must be unique. Enter the hostname: Enter SCSNODE: u1 If you plan to use DECnet, SCSSYSTEMID must be set based on the DECnet Phase IV address. Choose `Yes`: Do you plan to use DECnet? (Yes/No) [Yes] DECnet Phase IV addresses are in the format DECnet_area_number.DECnet_node_number DECnet_area_number is a number between 1 and 63. DECnet_node_number is a number between 1 and 1023. If you plan to use DECnet WITHOUT Phase IV compatible addresses, enter 0.0. Enter the DECnet code, in our case `1.132`: Enter DECnet (Phase IV) Address: [1.1] 1.132 Output: SCSSYSTEMID will be set to 1156. This was calculated as follows: (DECnet_area_number * 1024) + DECnet_node_number Next is the date and time setup. I'm in the Netherlands, so my timezone is in Europe: Configuring the Local Time Zone TIME ZONE SPECIFICATION -- MAIN Time Zone Menu "*" indicates a menu 0* GMT 1* AFRICA 17) EST 33) IRAN 49) PORTUGAL 2* AMERICA 18) EST5EDT 34) ISRAEL 50) PRC 3* ANTARCTICA 19* ETC 35) JAMAICA 51) PST8PDT 4* ARCTIC 20* EUROPE 36) JAPAN 52) ROC 5* ASIA 21) FACTORY 37) KWAJALEIN 53) ROK 6* ATLANTIC 22) GB-EIRE 38) LIBYA 54) SINGAPORE 7* AUSTRALIA 23) GB 39) MET 55) TURKEY 8* BRAZIL 24) GMT-0 40* MEXICO 56) UCT 9* CANADA 25) GMT 41* MIDEAST 57) UNIVERSAL 10) CET 26) GMT0 42) MST 58* US 11* CHILE 27) GMTPLUS0 43) MST7MDT 59) UTC 12) CST6CDT 28) GREENWICH 44) NAVAJO 60) W-SU 13) CUBA 29) HONGKONG 45) NZ-CHAT 61) WET 14) EET 30) HST 46) NZ 62) ZULU 15) EGYPT 31) ICELAND 47* PACIFIC 16) EIRE 32* INDIAN 48) POLAND Press "Return" to redisplay, enter "=" to search or "?" for help, or Enter 20: Select the number above that best represents the desired time zone: 20 Output: EUROPE Time Zone Menu "*" indicates a menu 0* RETURN TO MAIN TIME ZONE MENU 1) AMSTERDAM 17) HELSINKI 33) NICOSIA 49) TALLINN 2) ANDORRA 18) ISLE_OF_MAN 34) OSLO 50) TIRANE 3) ATHENS 19) ISTANBUL 35) PARIS 51) TIRASPOL 4) BELFAST 20) JERSEY 36) PODGORICA 52) UZHGOROD 5) BELGRADE 21) KALININGRAD 37) POLAND 53) VADUZ 6) BERLIN 22) KIEV 38) PORTUGAL 54) VATICAN 7) BRATISLAVA 23) LISBON 39) PRAGUE 55) VIENNA 8) BRUSSELS 24) LJUBLJANA 40) RIGA 56) VILNIUS 9) BUCHAREST 25) LONDON 41) ROME 57) VOLGOGRAD 10) BUDAPEST 26) LUXEMBOURG 42) SAMARA 58) WARSAW 11) BUSINGEN 27) MADRID 43) SAN_MARINO 59) ZAGREB 12) CHISINAU 28) MALTA 44) SARAJEVO 60) ZAPOROZHYE 13) COPENHAGEN 29) MARIEHAMN 45) SIMFEROPOL 61) ZURICH 14) DUBLIN 30) MINSK 46) SKOPJE 15) GIBRALTAR 31) MONACO 47) SOFIA 16) GUERNSEY 32) MOSCOW 48) STOCKHOLM Press "Return" to redisplay, enter "=" to search or "?" for help, or Choose `Amsterdam` by entering `1` Select the number above that best represents the desired time zone: 1 Confirm by entering `YES`: You selected EUROPE / AMSTERDAM as your time zone. Is this correct? (Yes/No) [YES]: A few questions about daylight saving time, if you selected a timezone that has that: Configuring the Time Differential Factor (TDF) Default Time Differential Factor for standard time is 1:00. Default Time Differential Factor for daylight saving time is 2:00. The Time Differential Factor (TDF) is the difference between your system time and Coordinated Universal Time (UTC). UTC is similar in most respects to Greenwich Mean Time (GMT). The TDF is expressed as hours and minutes, and should be entered in the hh:mm format. TDFs for the Americas will be negative (-3:00, -4:00, etc.); TDFs for Europe, Africa, Asia and Australia will be positive (1:00, 2:00, etc.). This time zone supports daylight saving time. Enter `No`: Is this time zone currently on daylight saving time? (Yes/No): no Accept the default of `1.00`: Enter the Time Differential Factor [1:00]: NEW SYSTEM TIME DIFFERENTIAL FACTOR = 1:00 Is this correct? [Y]: y Skip the PAK license, we'll do that after we finished installing: If you have Product Authorization Keys (PAKs) to register, you can register them now. Do you want to register any Product Authorization Keys? (Yes/No) [Yes] No With the [old es40 emulator on Ubuntu 16.04 this is how far we came][17]. Amazing that AXPbox handles this so well without crashing. Accept the defaults on all the next questions, yes we want all the good stuff: The following products are part of the the OpenVMS installation; they will be installed along with the OpenVMS operating system: o Availability Manager (base) for OpenVMS Alpha o CDSA for OpenVMS Alpha o KERBEROS for OpenVMS Alpha o SSL for OpenVMS Alpha (based on OpenSSL V0.9.8) o SSL1 V1.0 for OpenVMS Alpha (based on OpenSSL V1.0.2) o Performance Data Collector (base) for OpenVMS Alpha o HP Binary Checker for OpenVMS Alpha You can also install the following optional products along with the OpenVMS operating system: o DECwindows Motif for OpenVMS Alpha o DECnet-Plus for OpenVMS Alpha o DECnet Phase IV for OpenVMS Alpha o TCP/IP Services for OpenVMS If you want to change your selections, you can do so later in the installation by answering "NO" to the following question: "Do you want the defaults for all options?" Yes DECwindows: Do you want to install DECwindows Motif for OpenVMS Alpha V1.7-F? (Yes/No) [Yes] Yes DECnet: Beginning with OpenVMS V7.1, the DECnet-Plus kit is provided with the OpenVMS operating system kit. DECnet Phase IV applications are supported by DECnet-Plus. DECnet Phase IV is also provided as an option. If you install DECnet-Plus and TCP/IP you can run DECnet applications over a TCP/IP network. Please see the OpenVMS Management Guide for information on running DECnet over TCP/IP. Do you want to install DECnet-Plus for OpenVMS Alpha V8.4-D? (Yes/No) [Yes] Yes TCP/IP: Do you want to install TCP/IP Services for OpenVMS V5.7-13ECO5F? (Yes/No) [Yes] We don't need a detailed description: The installation operation can provide brief or detailed descriptions. In either case, you can request the detailed descriptions by typing ?. Do you always want detailed descriptions? (Yes/No) [No] Some information on not being able to validate signed kits: The system was booted from a device containing the OpenVMS Alpha distribution. Validation of signed kits is not supported in this restricted environment. Accept the default options again with a `YES`: The following product has been selected: VSI AXPVMS OPENVMS V8.4-2L1 Platform (product suite) Configuration phase starting ... You will be asked to choose options, if any, for each selected product and for any products that may be installed to satisfy software dependency requirements. Configuring VSI AXPVMS OPENVMS V8.4-2L1: OPENVMS and related products Platform Copyright 2015-2016 VMS Software, Inc. VMS Software, Inc. Do you want the defaults for all options? [YES] A big blob of text, give it a big `YES`: Availability Manager (base) for OpenVMS Alpha CDSA for OpenVMS Alpha KERBEROS for OpenVMS Alpha SSL for OpenVMS Alpha (based on OpenSSL V0.9.8) VSI AXPVMS SSL V1.4-502A: SSL V1.4 for OpenVMS Alpha (Based on OpenSSL 0.9.8ze) VSI SSL is not Backward Compatible! The VSI SSL Version 1.4 for OpenVMS is based on the 0.9.8ze baselevel of OpenSSL. Some of the OpenSSL API, data structure and command are changed from the previous HP SSL version 1.3 (Based on OpenSSL 0.9.7e). If you were running a version of HP SSL prior to Version 1.4 and your application is dependent upon the SSL, you must recompile and relink your code after you upgrade to Version 1.4. You must recompile and re-link your code with the latest SSL header files and shareable images if you see the following error: $ run ssl_test %DCL-W-ACTIMAGE, error activating image SSL$LIBSSL_SHR32 -CLI-E-IMGNAME, image file DWLLNG$DKA500:[SYS0.SYSCOMMON.][SYSLIB]SSL$LIBSSL_SHR32.EXE -SYSTEM-F-SHRIDMISMAT, ident mismatch with shareable image $ Following list of HP products/components that are dependent on HP SSL. Look at the product website for these products that is compatible with HP SSL Version 1.4 LDAP ENCRYPT Stunnel HP System Management Homepage (HP SMH) for OpenVMS HP WBEM Services for OpenVMS Integrity servers HP OpenView Operations Agent for OpenVMS OpenView Performance Agent (OVPA) for OpenVMS Secure Web Server ABS HP Enterprise Directory If any of the product dependent upon the above list of products, also will not work. For example: - iCAp/nPar depends upon HP WBEMServices also will not work - "$ backup/encrypt command which is in turn dependant on Encrypt will not work Links to the above products are available in the HP SSL home page. http://h71000.www7.hp.com/openvms/products/ssl/ssl.html Do you want to continue? [YES] No need to review the options here: SSL1 V1.0 for OpenVMS Alpha (based on OpenSSL V1.0.2) Performance Data Collector (base) for OpenVMS Alpha HP Binary Checker for OpenVMS Alpha Do you want to review the options? [NO] And finally, after what seems ages, we're ready for liftoff: Execution phase starting ... One more summary, and it's chugging along installing: The following products will be installed to destinations: VSI AXPVMS AVAIL_MAN_BASE V8.4-2L1 DISK$ALPHASYS:[VMS$COMMON.] VSI AXPVMS CDSA V2.4-320A DISK$ALPHASYS:[VMS$COMMON.] VSI AXPVMS DECNET_OSI V8.4-D DISK$ALPHASYS:[VMS$COMMON.] VSI AXPVMS DWMOTIF V1.7-F DISK$ALPHASYS:[VMS$COMMON.] VSI AXPVMS DWMOTIF_SUPPORT V8.4-2L1 DISK$ALPHASYS:[VMS$COMMON.] VSI AXPVMS HPBINARYCHECKER V1.1-A DISK$ALPHASYS:[VMS$COMMON.] VSI AXPVMS KERBEROS V3.1-152A DISK$ALPHASYS:[VMS$COMMON.] VSI AXPVMS OPENVMS V8.4-2L1 DISK$ALPHASYS:[VMS$COMMON.] VSI AXPVMS SSL V1.4-502A DISK$ALPHASYS:[VMS$COMMON.] VSI AXPVMS SSL1 V1.0-2JA DISK$ALPHASYS:[VMS$COMMON.] VSI AXPVMS TCPIP V5.7-13ECO5F DISK$ALPHASYS:[VMS$COMMON.] VSI AXPVMS TDC_RT V2.3-1220 DISK$ALPHASYS:[VMS$COMMON.] VSI AXPVMS VMS V8.4-2L1 DISK$ALPHASYS:[VMS$COMMON.] Portion done: 0% This part took over 2 hours on my machine, so grab a cup of your favorite beverage. If you are installing the VSI version of OpenVMS, you may get this error during install: Portion done: 0%...10% %PCSI-E-OPENOUT, error opening DISK$ALPHASYS:[VMS$COMMON.][SYSHLP]HELPLIB.HLB; as output -RMS-E-FNF, file not found %PCSI-E-OPFAILED, operation failed Terminating is strongly recommended. Do you want to terminate? [YES] no %PCSI-E-OPENIN, error opening DISK$ALPHASYS:[VMS$COMMON.][SYSLIB]DCLTABLES.EXE; as input -RMS-E-FNF, file not found %PCSI-E-OPFAILED, operation failed Terminating is strongly recommended. Do you want to terminate? [YES] no Portion done: 20%...30%...40%...50% %PCSI-I-PRCOUTPUT, output from subprocess follows ... %SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual address=00000000001AE104, PC=000000007FDC5324, PS=0000001B %PCSI-E-MODREPLERR, error replacing module DUMP in library DISK$ALPHASYS:[VMS$COMMON.][SYSLIB]DCLTABLES.EXE -SYSTEM-F-ACCVIO, access violation, reason mask=!XB, virtual address=!XH, PC=!XH, PS=!XL %PCSI-E-OPFAILED, operation failed Terminating is strongly recommended. Do you want to terminate? [YES] no This is not unique to AXPbox, it happens in AlphaVM, too - just ignore it, make sure to give it a `NO`. Portion done: 60%...70%...80%...90% %PCSI-I-PRCOUTPUT, output from subprocess follows ... % - Execute SYS$MANAGER:TCPIP$CONFIG.COM to proceed with configuration of % HP TCP/IP Services for OpenVMS. % Portion done: 100% Another summary, `Return` is your friend: The following products have been installed: VSI AXPVMS AVAIL_MAN_BASE V8.4-2L1 Layered Product VSI AXPVMS CDSA V2.4-320A Layered Product VSI AXPVMS DECNET_OSI V8.4-D Layered Product VSI AXPVMS DWMOTIF V1.7-F Layered Product VSI AXPVMS DWMOTIF_SUPPORT V8.4-2L1 Layered Product VSI AXPVMS HPBINARYCHECKER V1.1-A Layered Product VSI AXPVMS KERBEROS V3.1-152A Layered Product VSI AXPVMS OPENVMS V8.4-2L1 Platform (product suite) VSI AXPVMS SSL V1.4-502A Layered Product VSI AXPVMS SSL1 V1.0-2JA Layered Product VSI AXPVMS TCPIP V5.7-13ECO5F Layered Product VSI AXPVMS TDC_RT V2.3-1220 Layered Product VSI AXPVMS VMS V8.4-2L1 Operating System VSI AXPVMS OPENVMS V8.4-2L1: OPENVMS and related products Platform VSI AXPVMS KERBEROS V3.1-152A Configure and set up Kerberos If Kerberos will be run on this system, but has not been used previously, you need to perform the following steps. o Run the Kerberos configuration procedure: @SYS$STARTUP:KRB$CONFIGURE.COM o Add the following line to SYS$MANAGER:SYSTARTUP_VMS.COM: $ @SYS$STARTUP:KRB$STARTUP o Add the following line to SYS$MANAGER:SYLOGIN.COM: $ @SYS$MANAGER:KRB$SYMBOLS Press RETURN to continue: Again more information: VSI AXPVMS SSL V1.4-502A: SSL V1.4 for OpenVMS Alpha (Based on OpenSSL 0.9.8ze) There are post installation tasks that you must complete after upgrading from previous SSL versions including verifying startup command procedures and logical names. Refer to SYS$HELP:SSL014.RELEASE_NOTES for more information. VSI AXPVMS SSL1 V1.0-2JA: SSL1 for OpenVMS AXP V1.0-2J (Based on OpenSSL 1.0.2J) There are post-installation tasks that you must complete. After upgrading from previous SSL1 versions Refer to SYS$HELP:SSL100-2J.RELEASE_NOTES for more information. VSI AXPVMS TDC_RT V2.3-1220: The Performance Data Collector (base) for OpenVMS Users of this product require the following privileges: (CMKRNL,LOG_IO,WORLD,PHY_IO,SYSPRV,SYSLCK) Users of this product require the following process resource limits: WSQUO minimum 6000 A read-me file is available in SYS$COMMON:[TDC]TDC_README.TXT Release notes are available in SYS$COMMON:[TDC]TDC_RELEASE_NOTES.TXT VSI AXPVMS HPBINARYCHECKER V1.1-A: HP Binary Checker Release notes for HP Binary Checker available VSI AXPVMS DECNET_OSI V8.4-D: DECnet-Plus V8.4-D for OpenVMS AXP Release notes are available in SYS$HELP:DECNET-Plus-V8_4.RELEASE_NOTES It is necessary to reboot your system for the software to take effect. You may install OSI Applications after rebooting and configuring. VSI AXPVMS TCPIP V5.7-13ECO5F: VSI TCP/IP Services for OpenVMS. VSI AXPVMS SSL1 V1.0-2JA: SSL1 for OpenVMS AXP V1.0-2J (Based on OpenSSL 1.0.2J) There are post-installation tasks that you must complete. After upgrading from previous SSL1 versions Refer to SYS$HELP:SSL100-2J.RELEASE_NOTES for more information. Check the release notes for current status of the product. %PCSIUI-I-COMPWERR, operation completed after explicit continuation from errors ************************************************************** * * * W A R N I N G * * * * One or more errors were encountered during installation/ * * upgrade. The target system may not operate correctly. * * * * You should correct the condition that caused the error(s) * * and repeat the installation/upgrade. * * * ************************************************************** Finally, output that states that our install is complete: The installation is now complete. When the newly installed system is first booted, a special startup procedure will be run. This procedure will: o Configure the system for standalone or OpenVMS Cluster operation. o Run AUTOGEN to set system parameters. o Reboot the system with the newly set parameters. You may shut down now or continue with other operations. Process AXPVMS_INSTALL logged out at 18-OCT-2018 08:44:06.52 Press Return to continue... Enter `9` to shutdown the system: **************************************************************** You can install or upgrade the OpenVMS ALPHA operating system or you can install or upgrade layered products that are included on the OpenVMS ALPHA distribution media (CD/DVD). You can also execute DCL commands and procedures to perform "standalone" tasks, such as backing up the system disk. Please choose one of the following: 1) Upgrade, install or reconfigure OpenVMS ALPHA Version V8.4-2L1 2) Display layered products that this procedure can install 3) Install or upgrade layered products 4) Show installed products 5) Reconfigure installed products 6) Remove installed products 7) Find, Install or Undo patches; Show or Delete Recovery Data 8) Execute DCL commands and procedures 9) Shut down this system Enter CHOICE or ? for help: (1/2/3/4/5/6/7/8/9/?) 9 Shutting down the system You can close AXPbox by pressing `CTRL+C` if you're not automatically redirected to the SRM prompt (`P0 >>>`) > I do recommend you to make a copy of the disk image, as the installation takes a long time. If you want to play around with multiple installations, as we want to do, copy the `disk0.img` file somewhere safe, that saves you a few hours of installation later on. If you want to speed up the boot process, you can (re)enable `skip_memtest_hack = true;` in the `es40.cfg` file now. ### OpenVMS Configuration, autoboot Now that we've installed OpenVMS, it's time for the first boot. Edit the `es40.cfg` file and replace the `ALPHA0842L1.ISO` installation disk with your license ISO you created earlier. Fire up the emulator, we're going to setup `auto_boot`, so we skip the SRM prompt. Saves us a bit of time. At the SRM prompt, enter the following two commands: P00>>>set auto_action boot P00>>>set bootdef_dev dqa0 Then boot up: P00>>>boot dqa0 Since this is the first boot, we are not setting `boot_osflags`, we want the conversational startup to happen this time. If you're wondering, the first half of `osflags` is the directory to boot from (0 = [SYS0], 1 = [SYS1]) and the second part can enable specific functions on boot: - `0,1`: Enable SYSBOOT to change system parameters; enable conversational booting for debugging purposes. - `0,2`: Load XDELTA - `0,4`: Stops at the initial system breakpoint. (EXEC_INIT) - `0.8`: Performs a diagnostic bootstrap - `0,10`: Stops at the bootstrap breakpoints - `0,20`: Omits header from secondary boot image - `0,80`: Prompts for the name of the secondary bootfile - `0,100`: Halts the system before secondary bootstrap - `0,2000`: Marks corrected read data error pages as bad. - `0,10000`: Print debug messages on boot. - `0,20000`: Print selected user messages at boot. - `0,30000`: Print even more debug messages on boot. The next time you fire up the emulator, it will automatically boot the harddisk: AlphaServer ES40 Console V7.3-1, built on Feb 27 2007 at 12:57:47 CPU 0 booting (boot dqa0.0.0.15.0 -flags 0) block 0 of dqa0.0.0.15.0 is a valid boot block Now that we've set up autoboot and OpenVMS is starting up, continue on to the next paragraph. #### First boot First boot takes a while, things are setup, uncompressed and you have to wait some more time. If you thought the installation took a long time, this process will take about half that time in my experience. Here's the boatload of output: OpenVMS (TM) Alpha Operating System, Version V8.4-2L1 Copyright 2016 VMS Software, Inc. %DECnet-I-LOADED, network base image loaded, version = 05.17.02 %DECnet-W-NOOPEN, could not open SYS$SYSROOT:[SYSEXE]NET$CONFIG.DAT Installing required known files... Configuring devices... %%%%%%%%%%% OPCOM 2-NOV-2020 06:20:09.58 %%%%%%%%%%% Operator _U1$OPA0: has been enabled, username SYSTEM %%%%%%%%%%% OPCOM 2-NOV-2020 06:20:09.59 %%%%%%%%%%% Operator status for operator _U1$OPA0: CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY, LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10, OPER11, OPER12 %%%%%%%%%%% OPCOM 2-NOV-2020 06:20:09.62 %%%%%%%%%%% Logfile has been initialized by operator _U1$OPA0: Logfile is U1::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;1 %%%%%%%%%%% OPCOM 2-NOV-2020 06:20:09.62 %%%%%%%%%%% Operator status for operator U1::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;1 CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY, LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10, OPER11, OPER12 %SYSTEM-I-BOOTUPGRADE, security auditing disabled %%%%%%%%%%% OPCOM 2-NOV-2020 06:20:10.09 %%%%%%%%%%% Message from user SYSTEM on U1 %JBC-E-OPENERR, error opening SYS$COMMON:[SYSEXE]QMAN$MASTER.DAT; %%%%%%%%%%% OPCOM 2-NOV-2020 06:20:10.09 %%%%%%%%%%% Message from user SYSTEM on U1 -RMS-E-FNF, file not found %LICENSE-F-EMTLDB, license database contains no license records %RUN-S-PROC_ID, identification of created process is 0000002A %SYSTEM-I-BOOTUPGRADE, security server not started %SYSTEM-I-BOOTUPGRADE, ACME server not started %%%%%%%%%%% OPCOM 2-NOV-2020 06:20:12.51 %%%%%%%%%%% Message from user SYSTEM on U1 TDF-I-SETTDF TDF set new timezone differential NET$STARTUP, Network not started due to UPGRADE boot %SYSTEM-W-NOSUCHDEV, no such device available %%%%%%%%%%% OPCOM 2-NOV-2020 06:20:15.20 %%%%%%%%%%% Message from user SYSTEM on U1 %LICENSE-E-NOAUTH, VSI OPENVMS-ALPHA use is not authorized on this node -LICENSE-F-NOLICENSE, no license is active for this software product -LICENSE-I-SYSMGR, please see your system manager %LICENSE-E-NOAUTH, VSI OPENVMS-ALPHA use is not authorized on this node -LICENSE-F-NOLICENSE, no license is active for this software product -LICENSE-I-SYSMGR, please see your system manager Startup processing continuing... %SYSTEM-I-BOOTUPGRADE, Coordinated Startup not performed %EWA0, Auto-negotiation mode set by console %EWA0, Link state: UP %EWA0, Auto-negotiation (internal) starting %EWA0, Full Duplex 100baseTX connection selected CDSA-I-InitCDSA, Initializing CDSA... MDS installed successfully. Module installed successfully. Module installed successfully. Module installed successfully. Module installed successfully. Module installed successfully. Module installed successfully. Module installed successfully. Module installed successfully. Module installed successfully. Module installed successfully. Module installed successfully. CDSA-I-InitCDSA, CDSA Initialization complete CDSA-I-InitSecDel, Initializing Secure Delivery... Install completed successfully. Install completed successfully. Module installed successfully. Module installed successfully. CDSA-I-InitSecDel, Secure Delivery Initialization complete AUTOGEN will now be run to compute the new system parameters. The system will then shut down and reboot, and the installation or upgrade will be complete. After rebooting you can continue with such system management tasks as: Configuring networking software (TCP/IP Services, DECnet, other) Using SYS$MANAGER:CLUSTER_CONFIG.COM to create an OpenVMS Cluster Creating FIELD, SYSTEST and SYSTEST_CLIG accounts if needed %AUTOGEN-I-BEGIN, GETDATA phase is beginning. %AUTOGEN-I-NEWFILE, Previous contents of SYS$SYSTEM:CLU$PARAMS.DAT have been copied to SYS$SYSTEM:CLU$PARAMS.OLD. You may wish to purge SYS$SYSTEM:CLU$PARAMS.OLD. %AUTOGEN-I-NEWFILE, Previous contents of SYS$SYSTEM:CLU$PARAMS.DAT have been copied to SYS$SYSTEM:CLU$PARAMS.OLD. You may wish to purge SYS$SYSTEM:CLU$PARAMS.OLD. %AUTOGEN-I-NEWFILE, Previous contents of SYS$SYSTEM:CLU$PARAMS.DAT have been copied to SYS$SYSTEM:CLU$PARAMS.OLD. You may wish to purge SYS$SYSTEM:CLU$PARAMS.OLD. %AUTOGEN-I-NEWFILE, A new version of SYS$SYSTEM:PARAMS.DAT has been created. You may wish to purge this file. %AUTOGEN-I-END, GETDATA phase has successfully completed. %AUTOGEN-I-BEGIN, GENPARAMS phase is beginning. %AUTOGEN-I-NEWFILE, A new version of SYS$MANAGER:VMSIMAGES.DAT has been created. You may wish to purge this file. %SYSTEM-W-NOSUCHDEV, no such device available %AUTOGEN-I-NEWFILE, A new version of SYS$SYSTEM:SETPARAMS.DAT has been created. You may wish to purge this file. %AUTOGEN-I-END, GENPARAMS phase has successfully completed. %AUTOGEN-I-BEGIN, GENFILES phase is beginning. Computed size: 42; current size: 8202 %SYSGEN-I-CREATED, SYS$SYSROOT:[SYSEXE]SYS$ERRLOG.DMP;2 created Computed size: 2105300; current size: 4604 %SYSGEN-I-EXTENDED, SYS$SYSROOT:[SYSEXE]PAGEFILE.SYS;1 extended Extending SYS$SYSROOT:[SYSEXE]PAGEFILE.SYS to 2105300 blocks will take approximately 180 seconds. Please wait ... 180 seconds, I wish. It took ten minutes on my system, but your mileage may vary. Next few lines of output, including an automatic reboot: %SYSGEN-I-EXTENDED, SYS$SYSROOT:[SYSEXE]PAGEFILE.SYS;1 extended ... done. Computed size: 315554; current size: 0 %SYSGEN-I-CREATED, DQA0:[SYS0.SYSEXE]SYSDUMP.DMP;1 created %SYSGEN-I-EXTENDED, DQA0:[SYS0.SYSEXE]SYSDUMP.DMP;1 extended Computed size: 66200; current size: 1000 %SYSGEN-I-EXTENDED, SYS$SYSROOT:[SYSEXE]SWAPFILE.SYS;1 extended %AUTOGEN-I-REPORT, AUTOGEN has produced some informational messages which have been stored in the file SYS$SYSTEM:AGEN$PARAMS.REPORT. You may wish to review the information in that file. %AUTOGEN-I-END, GENFILES phase has successfully completed. %AUTOGEN-I-BEGIN, SETPARAMS phase is beginning. %%%%%%%%%%% OPCOM 2-NOV-2020 06:26:35.77 %%%%%%%%%%% Message from user SYSTEM on U1 %SYSGEN-I-WRITECUR, CURRENT system parameters modified by process ID 00000023 in to file SYS$SYSROOT:[SYSEXE]ALPHAVMSSYS.PAR;2 %AUTOGEN-I-SYSGEN, parameters modified %AUTOGEN-I-END, SETPARAMS phase has successfully completed. %AUTOGEN-I-BEGIN, REBOOT phase is beginning. The system is shutting down to allow the system to boot with the generated site-specific parameters and installed images. The system will automatically reboot after the shutdown and the upgrade will be complete. SHUTDOWN -- Perform an Orderly System Shutdown on node U1 As you might have noticed, this console terminal is very verbose. When the first boot is finished, make sure to configure networking and work via SSH as a regular user, that terminal will be way less chatty. %SHUTDOWN-I-BOOTCHECK, performing reboot consistency check... %SHUTDOWN-I-CHECKOK, basic reboot consistency check completed %SHUTDOWN-I-OPERATOR, this terminal is now an operator's console %SHUTDOWN-I-DISLOGINS, interactive logins will now be disabled %SET-I-INTSET, login interactive limit = 0, current interactive value = 0 %SHUTDOWN-I-STOPQUEUES, the queues on this node will now be stopped %%%%%%%%%%% OPCOM 2-NOV-2020 06:26:38.49 %%%%%%%%%%% Message from user SYSTEM on U1 %JBC-E-OPENERR, error opening SYS$COMMON:[SYSEXE]QMAN$MASTER.DAT; %%%%%%%%%%% OPCOM 2-NOV-2020 06:26:38.50 %%%%%%%%%%% Message from user SYSTEM on U1 -RMS-E-FNF, file not found SHUTDOWN message on U1 from user SYSTEM at U1 Batch 06:26:38 U1 will shut down in 0 minutes; back up soon. Please log off node U1. Reboot system with AUTOGENerated parameters %SHUTDOWN-I-STOPUSER, all user processes will now be stopped %SHUTDOWN-I-REMOVE, all installed images will now be removed %SHUTDOWN-I-DISMOUNT, all volumes will now be dismounted %%%%%%%%%%% OPCOM 2-NOV-2020 06:26:39.86 %%%%%%%%%%% Message from user SYSTEM on U1 STARTUP, U1 shutdown was requested by the operator. halted CPU 0 halt code = 5 HALT instruction executed PC = ffffffff80093a84 Since we've setup autoboot, the emulator automatically boots again: CPU 0 booting resetting all I/O buses (boot dqa0.0.0.15.0 -flags 0) block 0 of dqa0.0.0.15.0 is a valid boot block reading 1230 blocks from dqa0.0.0.15.0 bootstrap code read in base = 200000, image_start = 0, image_bytes = 99c00(629760) initializing HWRPB at 2000 initializing page table at 3ff54000 initializing machine state setting affinity to the primary CPU jumping to bootstrap code OpenVMS (TM) Alpha Operating System, Version V8.4-2L1 Copyright 2016 VMS Software, Inc. %DECnet-I-LOADED, network base image loaded, version = 05.17.02 %DECnet-W-NOOPEN, could not open SYS$SYSROOT:[SYSEXE]NET$CONFIG.DAT %STDRV-I-STARTUP, OpenVMS startup begun at 2-NOV-2020 06:27:11.79 I'm going to skip over the output now, since that would be a big wall of text again. Once your prompt hangs at the following, you can press `Return` to login: %RUN-S-PROC_ID, identification of created process is 00000418 SYSTEM job terminated at 2-NOV-2020 06:28:47.35 Accounting information: Buffered I/O count: 4004 Peak working set size: 7792 Direct I/O count: 1753 Peak virtual size: 186624 Page faults: 4820 Mounted volumes: 0 Charged CPU time: 0 00:00:26.35 Elapsed time: 0 00:01:35.85 It will ask you to choose a new password, do so: Welcome to OpenVMS (TM) Alpha Operating System, Version V8.4-2L1 Username: SYSTEM Password: %LICENSE-I-NOLICENSE, no license is active for this software product %LOGIN-S-LOGOPRCON, login allowed from OPA0: Welcome to OpenVMS (TM) Alpha Operating System, Version V8.4-2L1 Your password has expired; you must set a new password to log in New password: Verification: Your output will be full of AUDITSERVER messages, you get my point on the chattiness: %%%%%%%%%%% OPCOM 2-NOV-2020 06:32:12.55 %%%%%%%%%%% Message from user AUDIT$SERVER on U1 Security alarm (SECURITY) and security audit (SECURITY) on U1, system id: 1156 Auditable event: System UAF record modification Event time: 2-NOV-2020 06:32:12.54 PID: 0000041A Process name: SYSTEM Username: SYSTEM Process owner: [SYSTEM] Terminal name: OPA0: Image name: U1$DQA0:[SYS0.SYSCOMMON.][SYSEXE]LOGINOUT.EXE Object class name: FILE Object name: SYS$COMMON:[SYSEXE]SYSUAF.DAT;1 User record: SYSTEM Password Date: New: 2-NOV-2020 06:32 Original: 18-OCT-2018 06:10 Posix UID: -2 Posix GID: -2 (%XFFFFFFFE) $ The dollar sign means you're now at a shell prompt. Finally! You can view some system information with the `show status` or `show cpu` command: $ show status Status on 2-NOV-2020 06:34:04.03 Elapsed CPU : 0 00:00:10.09 Buff. I/O : 277 Cur. ws. : 4096 Open files : 0 Dir. I/O : 105 Phys. Mem. : 1312 Page Faults : 529 $ show cpu System: U1, AlphaServer ES40 CPU ownership sets: Active 0 Configure 0 CPU state sets: Potential 0 Autostart 0-3 Powered Down None Not Present 1-3 Hard Excluded None Failover None $ The help system is very comprehensive on OpenVMS, try the command `help show`, and play around. To exit a command if you're stuck, don't use `CTRL+C`, but `CTRL+Z`. Once you finished playing around and admiring your hard work, continue on to activating the license. #### Activate the license If you haven't prepared the license ISO, check the top of this page for that topic. I assume you have it configured in the `es40.cfg` file. This short paragraph is [a summary of this page, read that for more information on whats happening][13]. Figure out which disk is the license ISO: $ show dev Device Device Error Volume Free Trans Mnt Name Status Count Label Blocks Count Cnt U1$DQA0: Mounted 0 ALPHASYS 7998480 313 1 U1$DQA1: Offline 1 U1$DVA0: Offline 0 U1$DQB0: Online 0 U1$DQB1: Offline 1 The only other `online` disk is `DQB0`. Check that for more information: $ show dev dqb0 /full Output: Disk U1$DQB0:, device type pak.iso, is online, file-oriented device, shareable, available to cluster, error logging is enabled. Error count 0 Operations completed 1 Owner process "" Owner UIC [SYSTEM] Owner process ID 00000000 Dev Prot S:RWPL,O:RWPL,G:R,W Reference count 0 Default buffer size 512 Total blocks 16515072 Sectors per track 63 Total cylinders 16384 Tracks per cylinder 16 This is our `pak.iso` file we created earlier. Mount the license disk: $ MOUNT /OVERRIDE=IDENT DQB0 Output: %MOUNT-I-WRITELOCK, volume is write locked %MOUNT-I-CDROM_ISO, license: (1 of 1) , mounted on _U1$DQB0: Navigate to the mounted volume folder: SET DEF _U1$DQB0:[000000] - `_U1` is our hostname, on clusters all disks are available on all nodes, you address them via their hostname. - `DQB0` is the device name - `[000000]` has to do with the Master File Directory. Check [this page][13] for more info. This folder has our license file: $ dir Output: Directory U1$DQB0:[000000] ALPHA_CO.COM;1 Total of 1 file. If you have a HP hobbyist license, replace the filename in the following commands. Copy the license script from the disk to the system. This is required because we need to change the document format, line endings are messed up. [Check here for more info on that as well][13]. COPY ALPHA_CO.COM;1 SYS$LOGIN Navigate back to the folder we just copied the license to: SET DEF SYS$LOGIN Update the file to "fix" the line ending: SET FILE/ATTRIBUTE=(RFM=STM) ALPHA_CO.COM;1 Finally, execute the license script: @ALPHA_CO.COM;1 On my first try, nothing happened, no output. Checking the license status confirmed that no licenses were added: $ SHOW LICENSE Active licenses on node U1: %SHOW-I-NOLICENSE, no licenses exist The script does contain license command: $ TYPE ALPHA_CO.COM;1 Output: $! Software Product Authorization Key Replica $! Issued by LICENSESVR $! Issued on 21-SEP-2020 08:13 $!----------------------------------- $ LICENSE REGISTER ALPHA-LP - /ISSUER=VSI - /AUTHORIZATION=... /PRODUCER=VSI - /UNITS=0 - /TERMINATION_DATE=20-SEP-2021 - /AVAILABILITY=H - /OPTIONS=(ALPHA) - /CHECKSUM=... $! Software Product Authorization Key Replica $! Issued by LICENSESVR $! Issued on 21-SEP-2020 08:13 $!----------------------------------- $ LICENSE REGISTER ALPHA-SYSTEM - /ISSUER=VSI - /AUTHORIZATION=... /PRODUCER=VSI - /UNITS=0 - /TERMINATION_DATE=20-SEP-2021 - /AVAILABILITY=A - /OPTIONS=(ALPHA) - /CHECKSUM=... $! Software Product Authorization Key Replica $! Issued by LICENSESVR $! Issued on 21-SEP-2020 08:14 $!----------------------------------- $ Manually trying to register the license told me that it was already registered: $ LICENSE REGISTER _PRODUCT: ALPHA-LP %LICENSE-F-DUPREC, license is already registered So whats going on there? On the HP build of OpenVMS, registering the license spams the console with loads of output, If we try to run the script again, it says that the license is already registered: $ @ALPHA_CO.COM;1 %LICENSE-F-DUPREC, license is already registered The `HELP LICENSE` page tells me that there is also a `LICENSE LIST` command. If we issue that, we see that there are two active licenses: $ LICENSE LIST /FULL License Management Facility V2.0 License Database File: SYS$COMMON:[SYSEXE]LMF$LICENSE.LDB;1 Created on: 18-OCT-2018 Created by user: SYSTEM Created by LMF Version: V2.0 ----------------------------------- Issuer: VSI Authorization: ... Product Name: ALPHA-LP Producer: VSI Units: 0 Version: 0.0 Release Date: (none) PAK Termination Date: 20-SEP-2021 Availability: H (Alpha & IA64 Layered Products) Activity: 0 Options: ALPHA Hardware ID: Revision Level: 1 Status: Active ----------------------------------- Issuer: VSI Authorization: ... Product Name: ALPHA-SYSTEM Producer: VSI Units: 0 Version: 0.0 Release Date: (none) PAK Termination Date: 20-SEP-2021 Availability: A (VAX/VMS Capacity or OpenVMS Unlimited or Base) Activity: 0 Options: ALPHA Hardware ID: Revision Level: 1 Status: Active Command: REGISTER Modified by user: SYSTEM Modified on: 2-NOV-2020 06:47:37.10 [End Of List] Why all this extra text and troubleshooting? On HP OpenVMS you got a load of output telling all the licenses are activated, on VSI OpenVMS, nothing, and the `SHOW LICENSE` command tells me that there is nothing active. But, it seems this is different between HP and VSI, and it seems our hobbyist license is activated. I'm not sure if everything is correct now, but lets continue on. On the HP OpenVMS build, this does work so let's assume this works as well. Continue on with creating a user. _Update after a few days of writing this guide_, after a reboot (`@SYS$SYSTEM:SHUTDOWN.COM`), the licenses became visible: Active licenses on node U1: ------- Product ID -------- ---- Rating ----- -- Version -- Product Producer Units Avail Activ Version Release Termination ALPHA-LP VSI 0 H 0 0.0 (none) 20-SEP-2021 ALPHA-SYSTEM VSI 0 A 0 0.0 (none) 20-SEP-2021 #### Add a user It's a bad idea to always work with the administrative user, just as on linux or windows. Therefore, we will create a user that you can use for your daily activities. First create a folder for home folders of users: CREATE/DIR SYS$SYSDEVICE:[USERS] Check if there is not already a symlink: show log sys$users Output should be: %SHOW-S-NOTRAN, no translation for logical name SYS$USERS If so, continue on to create a logical name (sort of symlink): ASSIGN SYS$SYSDEVICE:[USERS] SYS$USERS It's not required to create such a folder, but as I'm used to Linux having `/home/`, it feels more comfortable and tidy to have a specific user folder here as well. Create home folder for our new user: CREATE /DIRECTORY SYS$SYSDEVICE:[USERS.REMY] Remember, on OpenVMS, folders are separated by a dot (`.`), not a `/` or `\`, so `USERS.REMY` is the comparable to `C:\Users\Remy` or `/home/remy`. Add a new administrative user with a temp password (TEMP). Same privileges as the `SYSTEM` account. # change to the folder where the user management program is located $ SET DEFAULT SYS$SYSTEM $ RUN AUTHORIZE UAF> ADD REMY/PASSWORD=TEMP/OWNER="Remy van Elst"/DEV=SYS$SYSDEVICE/DIR=[USERS.REMY]/UIC=[200,201]/FLAG=NODISUSER/PRIV=ALL Output: %UAF-I-PWDLESSMIN, new password is shorter than minimum password length %UAF-I-ADDMSG, user record successfully added %UAF-I-RDBADDMSGU, identifier REMY value [000200,000201] added to rights database On the main audit console: %%%%%%%%%%% OPCOM 2-NOV-2020 07:17:26.10 %%%%%%%%%%% Message from user AUDIT$SERVER on U1 Security alarm (SECURITY) and security audit (SECURITY) on U1, system id: 1156 Auditable event: System UAF record addition Event time: 2-NOV-2020 07:17:26.09 PID: 0000041A Process name: SYSTEM Username: SYSTEM Process owner: [SYSTEM] Terminal name: OPA0: Image name: U1$DQA0:[SYS0.SYSCOMMON.][SYSEXE]AUTHORIZE.EXE Object class name: FILE Object name: SYS$COMMON:[SYSEXE]SYSUAF.DAT;1 User record: REMY Default Device: New: SYS$SYSDEVICE: Original: Default Directory: New: [USERS.REMY] Original: [USER] Flags: New: (none) Original: DISUSER Owner: New: Remy van Elst Original: Privileges: New: CMKRNL,CMEXEC,SYSNAM,GRPNAM,ALLSPOOL,IMPERSO NATE,DIAGNOSE,LOG_IO,GROUP,NOACNT,PRMCEB,PRMMBX,PSWAPM,SETPRI,SETPRV,TMPMBX,WORL D,MOUNT,OPER,EXQUOTA,NETMBX,VOLPRO,PHY_IO,BUGCHK,PRMGBL,SYSGBL,PFNMAP,SHMEM,SYSP RV,BYPASS,SYSLCK,SHARE,UPGRADE,DOWNGRADE,GRPPRV,READALL,IMPORT,AUDIT,SECURITY Original: TMPMBX,NETMBX UIC: New: [200,201] Original: [200,200] Password Date: New: (pre-expired) Original: (pre-expired) Posix UID: -2 Pos *TRUNCATED* -- If audits are enabled for this class, the full message can be examined with ANALYZE/AUD %%%%%%%%%%% OPCOM 2-NOV-2020 07:17:26.17 %%%%%%%%%%% Message from user AUDIT$SERVER on U1 Security alarm (SECURITY) and security audit (SECURITY) on U1, system id: 1156 Auditable event: Identifier added Event time: 2-NOV-2020 07:17:26.16 PID: 0000041A Process name: SYSTEM Username: SYSTEM Process owner: [SYSTEM] Terminal name: OPA0: Image name: U1$DQA0:[SYS0.SYSCOMMON.][SYSEXE]AUTHORIZE.EXE Identifier name: REMY Identifier value: %X00800081 Attributes: none Posix UID: -2 Posix GID: -2 (%XFFFFFFFE) Press `CTRL+Z`to exit `UAF`, you should be back in a regular shell prompt (`$`). Assign the home folder to the new user: SET DIRECTORY/OWNER=REMY SYS$SYSDEVICE:[USERS.REMY] Logout as the system user: LOG Reconnect and login as your new user, the password is `TEMP`. You'll be prompted to set a new password. Welcome to OpenVMS (TM) Alpha Operating System, Version V8.4 Username: remy Password: TEMP Welcome to OpenVMS (TM) Alpha Operating System, Version V8.4 Your password has expired; you must set a new password to log in New password: Verification: Check your home folder: $ show def SYS$SYSDEVICE:[USERS.REMY] You can now try to run a privileged command, which should fail: set def sys$system run authorize Output: %UAF-E-NAOFIL, unable to open system authorization file (SYSUAF.DAT) -RMS-E-PRV, insufficient privilege or file protection violation You can give yourself permissions (sort of `sudo`) with the following command: $ SET PROCESS/PRIVILEGE=SYSPRV After which `run authorize` will work: $ run authorize UAF> With this separate account, you can still do privileged work, but you will have to elevate your rights, making you aware of whats happening and what you're doing. ### Networking Now the fun part you've all been waiting for, networking. As you could have read in the introduction, this was quite [an adventure for me to figure out][5] and due to the way network is emulated in AXPbox, there are some limitations. If you build and run AXPbox on Windows, you shouldn't have these problems, `libpcap` there supports host communication. But since this is a linux guide, we have to do a few workarounds. If you have the luck of having two separate NIC's and bridging works, then lucky you. It saves you a bunch of configuration. Plug in both cables (or wireless), configure one NIC (secondary) in `es40.cfg` and you're good to go. In the introduction we already discussed the setup, a virtual machine with 2 NIC's, one Virtualbox NAT and one bridged. Why one NAT and not two bridged adapters? Well, if the bridged adapter inside the VM would work, then we wouldn't need the VM because our host would be able to be bridged as well. Due to the host OS not being able to receive libpcap network packages, we eliminate the host OS nic by using a virtualbox NAT NIC. You need to give the emulator special permissions for networking: sudo setcap cap_net_raw,cap_net_bind_service=+eip ./axpbox If you still get a permission error afterwards, start the emulator as root (`sudo ./axpbox run`). Inside `es40.cfg` you need to configure your interface: pci0.4 = dec21143 { adapter = "enp0s3" mac = "08-00-DE-AD-BE-EF"; } The `MAC` parameter is optional, but if you are running multiple AXPbox instances to play with clustering, I recommend you change it to something other than the default. Change `en0ps3` to your network adapter, you can find it with the `ifconfig` or `ip addr` command. The next topic is for the Virtualbox setup. You can skip that if you don't use this setup with virtualbox. #### Virtualbox Port Forward If you've got the same setup as I have, Virtualbox Debian 10 VM with 2 NIC's, you need to setup a port forward to be able to reach OpenVMS. OpenVMS can connect to the outside world via NAT, but you cannot get in. Just like your home router allows all your devices to access the internet, but blocks the internet from accessing your devices unless you open a port. Open up the preferences pane in Virtualbox for the Debian VM, go to the networking page and select the NAT adapter tab. Click Advanced, then Port Forwarding and enter the following, as the image below shows: ![virtualbox port forward][18] - Enter port 2323 as Host port, and 23 as guest port for telnet. - Enter port 2222 as Host port, and 22 as guest port for SSH. For both lines, enter the NAT OpenVMS IP, in my case, `10.0.2.20`. You can now connect to localhost (or the Debian VM IP) with those ports to reach OpenVMS: telnet 10.0.0.8 2323 # 10.0.0.8 is my Debian VM IP Do note that you have to setup the services, which we'll do in the next section. Here's a picture of my HP OpenVMS telnet login: ![telnet login][19] If you decide to setup WASD (web server) you need to open up port 80/443 as well. Inside the NAT network all communication is allowed, so clustering doesn't require any additional ports open. #### OpenVMS TCP/IP setup Login as the SYSTEM user (or elevate your permissions, `SET PROCESS/PRIVILEGE=SYSPRV`) and issue the following command to open the interactive menu driven configuration for TCP/IP: @SYS$STARTUP:TCPIP$CONFIG.COM In the virtualbox setup, the IP and subnet for OpenVMS will be `10.0.2.25/24`, the gateway will be `10.0.2.2` and DNS is `8.8.8.8`. In the below commands, replace those for your network. On VSI OpenVMS the output is a bit different than on HP OpenVMS the first time, you should be able to follow along with both. First is a warning that not everything is setup yet: TCP/IP Network Configuration Procedure This procedure helps you define the parameters required to run HP TCP/IP Services for OpenVMS on this system. Checking TCP/IP Services for OpenVMS configuration database files. Creating SYS$COMMON:[SYSEXE]TCPIP$SERVICE.DAT Creating SYS$COMMON:[SYSEXE]TCPIP$HOST.DAT Creating SYS$COMMON:[SYSEXE]TCPIP$NETWORK.DAT Creating SYS$COMMON:[SYSEXE]TCPIP$ROUTE.DAT Creating SYS$COMMON:[SYSEXE]TCPIP$PROXY.DAT Creating SYS$COMMON:[SYSEXE]TCPIP$CONFIGURATION.DAT Node: U1 HP TCP/IP Services for OpenVMS requires either DHCP to be configured or alternately, you must manually configure an address, and a hostname. HP TCP/IP Services for OpenVMS will not start until these are configured. DHCP - NOT configured. Hostname - NOT configured. Please configure these from the Core Environment Menu on node U1. Press `Return` to continue. The next menu lists the possible choices. We'll start with `1`, the `Core Environment`: HP TCP/IP Services for OpenVMS Configuration Menu Configuration options: 1 - Core environment 2 - Client components 3 - Server components 4 - Optional components 5 - Shutdown HP TCP/IP Services for OpenVMS 6 - Startup HP TCP/IP Services for OpenVMS 7 - Run tests A - Configure options 1 - 4 [E] - Exit configuration procedure Enter configuration option: If you see license errors, like below: 2 - Client components No Client License 3 - Server components No Client License [...] 1 - Domain No Client License 3 - Routing No Client License 4 - BIND Resolver No Client License Those mean your hobbyist license wasn't installed correctly. Reboot and retry. Start with option 2, `Interfaces`: HP TCP/IP Services for OpenVMS Core Environment Configuration Menu Configuration options: 1 - Domain 2 - Interfaces 3 - Routing 4 - BIND Resolver 5 - Time Zone A - Configure options 1 - 5 [E] - Exit menu Enter configuration option: 2 Next pick the only interface, `WE0`: HP TCP/IP Services for OpenVMS Interface WE0 Configuration Menu (Node: U1) Configuration options: 1 - Add a primary address on WE0 2 - Add an alias address on WE0 3 - Enable DHCP client to manage address on WE0 [E] - Exit menu Enter configuration option: 1 Pick `1` to configure an IP address: * Is this address used by Clusters over IP (IPCI) [NO]: IPv4 Address may be entered with CIDR bits suffix. E.g. For a 16-bit netmask enter 10.0.1.1/16 Enter IPv4 Address []: 10.0.2.25/24 Enter hostname []: u1.home Requested configuration: Node : U1 Interface: WE0 IPCI : No Address : 10.0.2.25/24 Netmask : 255.255.255.0 (CIDR bits: 24) Hostname : u1.home * Is this correct [YES]: Exit the next menu with `E`: HP TCP/IP Services for OpenVMS Interface & Address Configuration Menu Hostname Details: Configured=u1.home, Active=u1 Configuration options: 0 - Set The Target Node (Current Node: U1) 1 - WE0 Menu (EWA0: TwistedPair 100mbps) 2 - 10.0.2.25/24 u1.home Configured [E] - Exit menu Enter configuration option: E Select option `3 - Routing` and answer `NO` to the first question: DYNAMIC ROUTING Configuration [...] * Do you want to configure dynamic ROUTED or GATED routing [NO]: Enter the hostname of your gateway, or it's IP address: A default route has not been configured. * Do you want to configure a default route [YES]: Enter your Default Gateway host name or address: 10.0.0.1 You'll be back in the previous menu. Select `4` for the DNS resolver configuration: BIND RESOLVER Configuration A BIND resolver has not been configured. HP TCP/IP Services for OpenVMS supports the Berkeley Internet Name Domain (BIND) resolver. BIND is a network service that enables clients to name resources or objects and share information with other objects on the network. Before configuring your system as a BIND resolver, you should first be sure that there is at least one system on the network configured as either a BIND primary or secondary server for this domain. You can specify a BIND server by its address or name; however, if specified by name, an entry for it must exist in the TCPIP$HOST database. You will be asked one question for each server. Press Return at the prompt to terminate the list. Enter the address of your DNS server, in our case it's Google DNS: Enter your BIND server name: 8.8.8.8 8.8.8.8 is not in the local host database. If you want to enter the server in the local host database, enter the server name. Otherwise, enter . Give it a name: Enter remote BIND server name []: googledns Enter nothing here, just `return`: Enter next BIND server name: Creating file TCPIP$ETC:IPNODES.DAT Creating file TCPIP$ETC:SERVICES.DAT Creating file TCPIP$ETC:RESOLV_CONF.TEMPLATE You must provide the domain name in order to run the BIND resolver. This information should be available from your Internet network administrator. You will now be asked to configure the domain name. Enter a domain name of choice here, I choose `local.home`. You'll be back in the main menu, exit that with `E` to go to the topmost menu. Select `6` to start the TCP/IP stack: Enter configuration option: 6 Begin Startup... %TCPIP-I-INFO, TCP/IP Services startup beginning at 3-NOV-2020 14:26:22.10 %TCPIP-I-INFO, creating UCX compatibility file SYS$COMMON:[SYSEXE]UCX$SERVICE.DAT [...] %%%%%%%%%%% OPCOM 3-NOV-2020 14:26:32.85 %%%%%%%%%%% Message from user INTERnet on U1 %TCPIP-I-FSIPADDRUP, WE0 10.0.2.25 primary active on node U1, interface WE0 [...] %TCPIP-S-STARTDONE, TCP/IP Services startup completed at 3-NOV-2020 14:26:41.06 IP Configuration is finished, lets test if we can connect to the outside world: $ tcpip ping 8.8.8.8 Output: PING 8.8.8.8 (8.8.8.8): 56 data bytes 64 bytes from 8.8.8.8: icmp_seq=0 ttl=63 time=169 ms 64 bytes from 8.8.8.8: icmp_seq=1 ttl=63 time=90 ms 64 bytes from 8.8.8.8: icmp_seq=2 ttl=63 time=46 ms 64 bytes from 8.8.8.8: icmp_seq=3 ttl=63 time=79 ms ----8.8.8.8 PING Statistics---- 4 packets transmitted, 4 packets received, 0% packet loss round-trip (ms) min/avg/max = 46/96/169 ms Yay! You can view the current information with `tcpip show`, a few examples: $ tcpip show int Packets Interface IP_Addr Network mask Receive Send MTU LO0 127.0.0.1 255.0.0.0 0 0 4096 WE0 10.0.2.25 255.255.255.0 5 6 1500 $ tcpip show route DYNAMIC Type Destination Gateway AN 0.0.0.0 10.0.2.2 AN 10.0.2.0/24 10.0.2.25 AH 10.0.2.25 10.0.2.25 AH 127.0.0.1 127.0.0.1 Later on in this guide we will configure telnet and SSH. #### Automatic TCP/IP Startup Once you reboot, you might notice TCP/IP is not started. You must do this manually each time with the following command: @SYS$STARTUP:TCPIP$STARTUP.COM Or you can edit the startup procedure to make it auto start on boot. Edit the following file: `SYS$COMMON:[SYSMGR]SYSTARTUP_VMS.COM` and remove the exclamation point (`!`) from the beginning of the following line: $!$ @SYS$STARTUP:TCPIP$STARTUP.COM You can edit this file with the following command: EDIT /EDT SYS$COMMON:[SYSMGR]SYSTARTUP_VMS.COM You'll enter a line editor. To switch to visual mode, type `change` followed by `Return`. You can use the arrow keys to scroll down. Exit visual mode with `CTRL+Z`, then type `exit` to save the file: *exit SYS$COMMON:[SYSMGR]SYSTARTUP_VMS.COM;2 413 lines With all network configuration done, lets continue on with enabling some network services, so we can make use of our network. #### Telnet, FTP & SSH To enable telnet or SSH, which will allow you to connect remotely to your OpenVMS installation. Open up the TCP/IP configuration menu: @SYS$STARTUP:TCPIP$CONFIG.COM Contrary to what you might expect, enabling TELNET is done from the Client Menu, not services menu, so enter `2` as choice. The following menu is displayed: HP TCP/IP Services for OpenVMS Client Components Configuration Menu Configuration options: 1 - DHCP Client Disabled Stopped 2 - FTP Client Disabled Stopped 3 - NFS Client Disabled Stopped 4 - REXEC and RSH Disabled Stopped 5 - RLOGIN Disabled Stopped 6 - SMTP Disabled Stopped 7 - SSH Client Disabled Stopped 8 - TELNET Disabled Stopped 9 - TELNETSYM Disabled Stopped A - Configure options 1 - 9 [E] - Exit menu Enter configuration option: 8 Choose `Enable and Start`, option 2: TELNET Configuration Service is not defined in the SYSUAF. Service is not defined in the TCPIP$SERVICE database. Service is not enabled. Service is stopped. TELNET configuration options: 1 - Enable service on this node 2 - Enable & Start service on this node [E] - Exit TELNET configuration Enter configuration option: 2 Lots of logging output later, the system tells you telnet is enabled: %TCPIP-I-INFO, service enabled %TCPIP-S-STARTDONE, TCPIP$TELNET startup completed Press key to continue ... In the services menu, telnet should now be enabled: 8 - TELNET Enabled Started Repeat the same process for service `7 - SSH Client` and if you want, `2 - FTP Client`. For SSH, you'll see the location of all configuration files as well: Creating TCPIP$SSH_DEVICE:[TCPIP$SSH.SSH2]SSH2_CONFIG. %TCPIP-I-INFO, image SYS$SYSTEM:TCPIP$SSH_SCP2.EXE installed %TCPIP-I-INFO, image SYS$SYSTEM:TCPIP$SSH_SFTP2.EXE installed %TCPIP-I-INFO, image SYS$SYSTEM:TCPIP$SSH_SSH-ADD2.EXE installed %TCPIP-I-INFO, image SYS$SYSTEM:TCPIP$SSH_SSH-AGENT2.EXE installed %TCPIP-I-INFO, image SYS$SYSTEM:TCPIP$SSH_SSH-KEYGEN2.EXE installed %TCPIP-I-INFO, image SYS$SYSTEM:TCPIP$SSH_SSH-SIGNER2.EXE installed %TCPIP-I-INFO, image SYS$SYSTEM:TCPIP$SSH_SSH2.EXE installed %TCPIP-I-INFO, logical names created %TCPIP-S-STARTDONE, TCPIP$SSH_CLIENT startup completed Press key to continue .. After which you will be told that the `SSH Server is not active on this system`, with a question to activate it: The SSH SERVER is not enabled. * Do you want to configure SSH SERVER [NO]: Enter `YES` and you'll be taken to the SSH Server menu. Choose option `2` to enable and start the SSH server. OpenVMS will now generate SSH keys, which takes a few minutes. 10 on my system to be exact: Creating SSH Service Entry Creating TCPIP$SSH_DEVICE:[TCPIP$SSH.SSH2]SSHD2_CONFIG. * Create a new default server host key? [YES]: * Please enter host key type DSA or RSA [RSA]: Creating private RSA key file: TCPIP$SSH_DEVICE:[TCPIP$SSH.SSH2]HOSTKEY Creating public RSA key file: TCPIP$SSH_DEVICE:[TCPIP$SSH.SSH2]HOSTKEY.PUB After a few minutes, key generation is complete and more output is shown: %TCPIP-I-INFO, image SYS$SYSTEM:TCPIP$SSH_SSHD2.EXE installed %TCPIP-I-INFO, image SYS$SYSTEM:TCPIP$SSH_SFTP-SERVER2.EXE installed %TCPIP-I-INFO, logical names created %%%%%%%%%%% OPCOM 3-NOV-2020 14:47:51.19 %%%%%%%%%%% Message from user INTERnet on U1 INTERnet ACP Activate SSH Server %TCPIP-I-INFO, service enabled %TCPIP-S-STARTDONE, TCPIP$SSH startup completed Press key to continue ... You can edit the SSH configuration, e.g. to change the port, in the following file: TCPIP$SSH_DEVICE:[TCPIP$SSH.SSH2]SSH2_CONFIG. If you want to configure SSH public key authentication, which I recommend you do (instead of passwords), [read my guide to do that here][20]. If you by accident choose just to enable the SSH server, you can start it manually with the following command: @SYS$STARTUP:TCPIP$SSH_STARTUP.COM FTP client and server do not prompt for any options, so you can just enable those via the respective menu's. The SSH server version is not the latest, so you'll have to specify some older configuration options to connect to OpenVMS: ssh -o HostKeyAlgorithms=ssh-rsa,ssh-dss \ -o KexAlgorithms=diffie-hellman-group1-sha1 \ -o Ciphers=aes128-cbc,3des-cbc \ -o MACs=hmac-md5,hmac-sha1 \ -l SYSTEM \ -p 2222 \ 127.0.0.1 Replace `-p 2222` by the Virtualbox Port forward you defined, or leave it out all together if you have two NIC's in your host PC, then you can just connect to the IP configured in OpenVMS. You can also put a few lines in your `~/.ssh/config` file: Host openvms Hostname 127.0.0.1 Port 2222 HostKeyAlgorithms ssh-rsa,ssh-dss KexAlgorithms diffie-hellman-group1-sha1 Ciphers aes128-cbc,3des-cbc MACs hmac-md5,hmac-sha1 User SYSTEM You will then be able to just type `ssh openvms` to connect. #### Installing unzip on OpenVMS Now that we have networking, you might want to be able to download files over http, which by default is a bit hard, since OpenVMS does not come with any command line download utilities, except for FTP and NFS. No HTTP. But we are lucky, since both curl and wget are available, prepackaged, for OpenVMS. They do require you to install `zip` first. There are a few ways to install zip, the fastest way is to [download unzip.alpha_exe][22] and use an FTP client to upload it to OpenVMS. Here's a picture of Filezilla connected to my OpenVMS installation: ![filezilla][26] Alternatively, you can download it via FTP on OpenVMS. Process software has an up to date version on their FTP server. Start the FTP client ftp A new prompt opens, connect to `ftp.process.com` and login as user `anonymous`: FTP> connect ftp.process.com Output: 220 triton.process.com MultiNet FTP Server Process V5.6(17) at Tue 3-Nov-2020 10 :59PM-EST Connected to ftp.process.com. Name (ftp.process.com:system): anonymous 331 anonymous user ok. Send real ident as password. Password: 230-Welcome to Process's TCPware Anonymous FTP directory 230-Thanks for stopping by. 230- 230-Note: If you're looking for MultiNet related files, please try 230-ftp.multinet.process.com. 230- 230-Here's a roadmap for what's available: 230- 230-Subdirectory Contents 230------------- -------- 230-DECUS The session notes for talks given by Process 230- Software Corporation personnel at recent 230- DECUS National Events. 230-SUPPORT Update kits for TCPware for OpenVMS - check 230- out the 00SUMMARY.TXT file in this subdirectory 230- for more details. 230-TCPWARE Contains various TCPware related subdirectories. 230- 230-VMS-FREEWARE Hunter Goatley's VMS Freeware archive, plus mirrors 230- of the WASD web server and other freeware packages 230- 230-Other files and directories exist. 230- 230-Guest User TEST logged into /delta_anonymous at Tue 3-Nov-2020 10:59PM-EST, job 2c000547. 230 Directory and access restrictions apply Make sure to set FTP to binary mode, otherwise you'll get corrupt files: FTP> binary 200 TYPE is now 8-bit binary You can browse around, but first get the unzip binary: FTP> get vms-freeware/unzip.alpha_exe Output: 200 Type I ok. 227 Entering passive mode; use PORT (192,42,95,32,79,81) 150 IMAGE retrieve of /delta_anonymous/vms-freeware/unzip.alpha_exe (204800 byte s) started. 226 Transfer completed. 203776 (8) bytes transferred. local: SYS$SYSROOT:[SYSMGR]unzip.alpha_exe;1 remote: vms-freeware/unzip.alpha_exe 203776 bytes received in 00:00:00.00 seconds (1897.81 Gbytes/s) If you get the following error: 500 I won't open a connection to 10.0.2.25 (only to .....) You must first enable passive mode: FTP> passive on Passive is ON. Exit FTP (`CTRL+Z`) and test if the binary is correctly transfered: run unzip.alpha_exe UnZip 6.00 of 20 April 2009, by Info-ZIP. For more details see: unzip -v. There however is one more thing to do, because by using `run` you can't pass any more parameters to a program: $ run unzip.alpha_exe -v %DCL-W-MAXPARM, too many parameters - reenter command with fewer parameters The `RUN` program only accepts one parameter, the program to run. You must declare a special symbol (a `foreign command`), otherwise DCL's command line parsing will be in the way. Use the following command to declare such a symbol: unzip :== $SYS$SYSROOT:[SYSMGR]unzip.alpha_exe There is a leading dollar sign (`$`), the format of the above line is `unzip :== $device:[path]unzip.exe`. Test to see if you can now call unzip: $ unzip -v Output: UnZip 6.00 of 20 April 2009, by Info-ZIP. Maintained by C. Spieler. Send bug reports using http://www.info-zip.org/zip-bug.html; see README for details. Latest sources and executables are at ftp://ftp.info-zip.org/pub/infozip/ ; see ftp://ftp.info-zip.org/pub/infozip/UnZip.html for other sites. Compiled with DEC C for OpenVMS (V6.2 Alpha) on Apr 29 2009. This symbol is gone however if you reboot the system, so it's best if you add it to your login file: EDIT /EDT SYS$LOGIN:LOGIN.COM Type `change` to get into visual mode, then read the file and place the command where it states interactive things should go: $! Put commands that you want executed only on an interactive login $! between this comment and the "ENDINTER:" label. $! $! For example, you may wish to add a shortcut to an editor: $! E*DIT == "EDIT/EDT/COMMAND=SYS$LOGIN:EDTINI.EDT" $! $ unzip :== $SYS$SYSROOT:[SYSMGR]unzip.alpha_exe $ $! Exit visual mode with `CTRL+z` and save by typing `exit` #### Installing wget or curl on OpenVMS You can find many packages, including `curl` and `wget` on the OpenVMS Freeware CD, which is [hosted by Digiater][21]. Not the most recent versions, but they will get you started. Fire up FTP again and connect: FTP> connect ftp.digiater.nl 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- 220-You are user number 2 of 12 allowed. 220-Local time is now 17:01. Server port: 21. 220-Only anonymous FTP is allowed here 220 You will be disconnected after 15 minutes of inactivity. Connected to www.digiater.nl. Name (www.digiater.nl:system): 230 Anonymous user logged in FTP> Turn on passive mode (`passive on`) and binary (`binary`): FTP> binary 200 TYPE is now 8-bit binary FTP> passive on Passive is ON. Get the curl archive: FTP> get openvms/freeware/v80/curl/alpha/curl-7_15_2-vms-axp.zip 227 Entering Passive Mode (185,92,71,114,199,82) 150-Accepted data connection 150 1740.5 kbytes to download 226-File successfully transferred 226 6.987 seconds (measured here), 249.86 Kbytes per second local: SYS$SYSROOT:[SYSMGR]curl-7_15_2-vms-axp.zip;1 remote: openvms/freeware/v 80/curl/alpha/curl-7_15_2-vms-axp.zip 1782272 bytes received in 00:00:00.00 seconds (16598.70 Gbytes/s) Exit FTP and unzip the file: $ unzip curl-7_15_2-vms-axp.zip Output: Archive: SYS$SYSROOT:[SYSMGR]CURL-7_15_2-VMS-AXP.ZIP;1 inflating: CURL.EXE_HPSSL inflating: CURL.EXE_NOSSL inflating: CURL.EXE_OPENSSL inflating: CURLLIB.OLB_HPSSL inflating: CURLLIB.OLB_NOSSL inflating: CURLLIB.OLB_OPENSSL inflating: README.VMS If you get the following error: Error: zipfile is in variable-length record format. Please run "bilf l SYS$SYSROOT:[SYSMGR]curl-7_15_2-vms-axp.zip;1" to convert the zipfile to stream-LF record format. (BILF is available at various VMS archives.) You probably forgot to turn on binary mode in FTP, or your file is corrupt. Try again with `binary` mode on in FTP. As with `unzip`, we must create a symbol to allow command line flags to be passed to curl: curl_openssl :== $SYS$SYSROOT:[SYSMGR]curl.exe_openssl curl_nossl :== $SYS$SYSROOT:[SYSMGR]curl.exe_nossl Test it: $ curl_openssl --version curl 7.15.2 (ALPHA-HP-VMS) libcurl/7.15.2 OpenSSL/0.9.7e Protocols: tftp ftp telnet dict http file https ftps Features: NTLM SSL You should now be able to get stuff over HTTP/HTTPS: $ curl_nossl http://raymii.org/s/index.html Homepage - Raymii.org Follow the same procedure for any other interesting software you see in the [freeware archive][21]. I found `crs` to be quite nice, it's a visual midnight commander style file manager. Create a new folder to download it into: $ create /directory [.crs] Go into the folder: $ set def [.crs] Download the zipfile via FTP: $ ftp ftp.digiater.nl 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- 220-You are user number 2 of 12 allowed. 220-Local time is now 06:59. Server port: 21. 220-Only anonymous FTP is allowed here 220 You will be disconnected after 15 minutes of inactivity. Connected to www.digiater.nl. Name (www.digiater.nl:system): 230 Anonymous user logged in Don't forget binary and passive: FTP> binary 200 TYPE is now 8-bit binary FTP> passive on Passive is ON. Get the archive: FTP> get openvms/freeware/v80/crs/crs.zip 200 PORT command successful 150-Connecting to port 49191 150 240.0 kbytes to download 226-File successfully transferred 226 0.858 seconds (measured here), 280.83 Kbytes per second local: SYS$SYSROOT:[SYSMGR.CRS]crs.zip;1 remote: openvms/freeware/v80/crs/crs.zip 245780 bytes received in 00:00:00.00 seconds (2289.00 Gbytes/s) FTP> Disconnect and unzip: $ unzip crs.zip Archive: SYS$SYSROOT:[SYSMGR.CRS]crs.zip;1 CRS V1.1 -- A Norton Commander-style directory browser for VMS Written by Alexey Gadzhiev Runs on both OpenVMS VAX and OpenVMS Alpha. To produce a .EXE, just execute @LINK.COM. (VMS file attributes saved---use UnZip v5.x+ on VMS to restore) inflating: AAAREADME.TXT Do as it says to create the exe: $ @LINK.COM Run it: $ run CRS Initializing, please wait ... ............................ Here's what crs looks on my system: ![crs][23] The [VSI OpenVMS Wiki][24] has a page on the freeware CD with a description of what most things are. [1]: /s/blog/Exciting_OpenVMS_Alpha_emulation_news_es40_has_been_forked_to_axpbox.html [2]: https://github.com/lenticularis39/axpbox [3]: /s/blog/OpenVMS_7.3_install_log_with_simh_vax_on_Ubuntu_16.04.html [4]: https://github.com/lenticularis39/axpbox/wiki/OpenVMS-installation-guide [5]: https://github.com/lenticularis39/axpbox/issues/16 [6]: http://simh.trailing-edge.com/pdf/simh_faq.pdf [7]: https://github.com/simh/simh/issues/950 [8]: https://github.com/simh/simh/blob/master/0readme_ethernet.txt [9]: https://vmssoftware.com/services/community-license/ [10]: /s/inc/downloads/openvms-HP-hobbyist-pak.txt [11]: https://fsck.technology/software/DEC-Compaq/OpenVMS%20Install%20Media/OpenVMS%208.4%20Alpha/ [12]: https://mirrors.pdp-11.ru/_alpha/_VMS/ [13]: /s/blog/OpenVMS_Mount_ISO_and_execute_scripts.html [14]: http://web.archive.org/web/20201101122848/http://www.grootersnet.nl/download/FREEWAREV60/VMSFAQ/VMSFAQ_017.HTML [15]: https://en.wikipedia.org/wiki/Files-11#Overview [16]: /s/blog/Multiple_passwords_for_one_user_UIC_uniqueness_and_the_system_password_on_OpenVMS.html [17]: /s/blog/Installing_the_es40_AlphaServer_emulator_0.18_on_Ubuntu_16.04_and_trying_to_install_openVMS_8.4_on_es40.html [18]: /s/inc/img/vbox-portfw-openvms.png [19]: /s/inc/img/openvms84-1.png [20]: /s/blog/SSH_public_key_authentication_on_OpenVMS.html [21]: https://www.digiater.nl/openvms/freeware/v80/ [22]: /s/inc/downloads/unzip.alpha_exeinc/downloads/unzip.alpha_exe [23]: /s/inc/img/openvms-crs.png [24]: http://web.archive.org/web/20201104051007/https://wiki.vmssoftware.com/Freeware_CD [25]: /s/inc/img/Vms-arrow-logo.jpg [26]: /s/inc/img/ftp-openvms.png [27]: https://github.com/lenticularis39/axpbox/commit/837750f2cb43a9cd32365b428a3dc470c45d0e86 --- License: All the text on this website is free as in freedom unless stated otherwise. This means you can use it in any way you want, you can copy it, change it the way you like and republish it, as long as you release the (modified) content under the same license to give others the same freedoms you've got and place my name and a link to this site with the article as source. This site uses Google Analytics for statistics and Google Adwords for advertisements. You are tracked and Google knows everything about you. Use an adblocker like ublock-origin if you don't want it. All the code on this website is licensed under the GNU GPL v3 license unless already licensed under a license which does not allows this form of licensing or if another license is stated on that page / in that software: This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . Just to be clear, the information on this website is for meant for educational purposes and you use it at your own risk. I do not take responsibility if you screw something up. Use common sense, do not 'rm -rf /' as root for example. If you have any questions then do not hesitate to contact me. See https://raymii.org/s/static/About.html for details.